Skip to main content

GPS SPD

Thank you for choosing GPS SPD in your awesome IoT project! 🎉 To help you get started, we have provided you all the necessary documentation for your product.

Product Description

This lightning arrestor connects between the antenna and the GPS receiver. A surge protection device for securing against transients, over-voltage, and surge currents induced by bolts of lightning.

For the purpose of protecting the indoor equipment and circuitry connected to the LoRa gateway, you need to install an Ethernet port Surge Protection Device (SPD).

By adopting a high pass filter, this product can effectively suppress the low-frequency interference induced by lightning while letting through the GPS signal with low insertion loss. A transient suppression device (TSD) and a gas discharge tube (GDT) are adopted for the protection of the DC feed circuit

Product Features

  • Connector Type: N-type male to N-type female
  • Impedance: 50 Ω
  • Frequency Range: 1500-1650 MHz
  • Power Loss: ≤ 0.3 dB
  • Ingress Protection: IP65