100M PoE Injector Datasheet
Overview
Product Description
The 100M RAK PoE injector, model R012-4800500 is a device that allows you to combine power and network connectivity to your PoE enabled devices using the same Cat5/5e or Cat6 twisted pair cable. It is compatible with WisGate Edge Series Gateways, WisGate Developer PoE-enabled Gateways, and WisHAT 9003 PoE Raspberry Pi Hat.
Product Features
- Input: 100-240 VAC (50~60 Hz)
- Output: 48.0 VDC 0.5 A
- Overcurrent protection
- Supports 10/100 Mbps Ethernet
Specifications
Figure 333: PoE Injector Front and Back ViewHardware
Interfaces
- 1x AC Input 100-240 V power input
Figure 334: Power Input Interface
Figure 335: RJ45 PoE and LAN interface and pins
- 1x PoE RJ45 connection to the PoE enabled device
| Pin | Designation |
|---|
| 4 and 5 | Positive |
| 7 and 8 | Negative |
| 1, 2, 3, and 6 | For data communication, directly connected to RJ45 LAN 1, 2, 3, and 6 |
- 1x LAN RJ45 connection to the network
| Pin | Designation |
|---|
| 1, 2, 3, and 6 | For data communication, directly connected with RJ45 PoE 1, 2, 3, and 6 |
| 4, 5, 7, and 8 | Not connected |
Electrical Requirements
| Parameter | Value |
|---|
| Input | 100-240 VAC (50~60 Hz) |
| Output | 48.0 VDC 0.5 A |
| EMC standards | EN55032, EN55013, EN55024, EN55020, FCC Part 15 Class B, GB9254, GB17625.1, Tested according to EN61000-4-4, Tested according to EN61000-4-5 |
Environmental requirements
| Feature | Specifications |
|---|
| Type of use | Indoor environment |
| Operating temperature | 0 to 40˚ C |
| Storage temperature | -30˚ C to 70˚ C |
| Operating humidity | 35~90% RH non-condensing |
| Storage humidity | 10~95% RH non-condensing |
| Enclosure material | Plastic |
| Weight | 98 g (±1 g) |
| Dimensions | 92.5 mm x 47 mm x 29.8 mm (±1 mm) |
