RAK19014 WisBlock Battery USB Power Slot Module Installation Guide
The RAK19014 WisBlock Battery USB Power Slot Module is a power board comprising a battery connector, a reset push button, and a power connector that connects to the WisBlock Base board.
Figure 1: RAK19014 hardware setupThe voltage of the battery must not exceed 4.3 V.
Prerequisite
Required items for RAK19014 setup include:
- RAK19014 WisBlock Battery USB Power Slot Module
- A compatible WisBlock Base Board with Power Slot
- A compatible WisBlock Core
- External battery
WisBlock WisConnector Installation
Attach a WisConnector
WisBlock Power modules are installed in the dedicated Power Slot of compatible WisBlock Base Boards. Secure the installed module using compatible screws to ensure a reliable mechanical connection.
Figure 1: RAK19013 mounting connection to WisBlock Base moduleDetach a WisConnector
The procedure for disassembling any type of WisBlock module is the same.
- First, remove the screws.
Figure 1: Removing screws from the WisBlock module- Once the screws are removed, check the module's silkscreen to find the correct location for applying force.
Figure 1: Detach silkscreen on the WisBlock module-
Apply even force to the marked connector area on the module PCB to detach the module from the Base Board.
Figure 1: Applying even forces on the proper location of a WisBlock module
Battery Selector
RAK19014 WisBlock Battery USB Power Slot Module can be powered by an external battery via the dedicated connectors. The matching connector for the battery cable is a JST PHR-2 2 mm pitch female . A cable assembly for the battery connector is also available for purchase in RAK store .
Figure 1: External battery connector-
Batteries can cause harm if not handled properly.
-
3.7 V-4.2 V Li-ion batteries are primarily supported. It is highly recommended not to use other types of batteries with the system unless you are familiar with the risks.
-
Ensure the battery wires, both rechargeable and non-rechargeable, match the polarity on the RAK19014 board. Not all batteries have the same wiring.
-
Ensure the module is secured with screws to ensure proper function.
