Skip to main content

RAK11200 WisBlock WiFi Module

Thank you for choosing RAK11200 WisBlock WiFi Module in your awesome IoT Project! 🎉 To help you get started, we have provided you with all the necessary documentation for your product.

Product Description

RAK11200 is a WisBlock Core module for RAK WisBlock based on Espressif ESP32-WROVER. It is a powerful, generic WiFi-BLE MCU module that targets a wide variety of applications. There are two CPU cores that can be individually controlled and the CPU clock frequency is adjustable from 80 MHz to 240 MHz. The low-power deep-sleep current consumption of the ESP32-WROVER is about 10 uA. This makes the RAK11200 an ultra-low-power communication solution. RAK11200 can be comfortably programmed with the Arduino IDE or PlatformIO.

Product Features

  • Two low-power Xtensa® 32-bit LX6 microprocessors
  • Up to 240 MHz CPU clock
  • Built-in PCB antenna
  • 4 MB External SPI Flash, 520 KB RAM
  • 8 MB SPI Pseudo static RAM (PSRAM)
  • WiFi 802.11 b/g/n (802.11n up to 150 Mbps)
  • Bluetooth v4.2 BR/EDR and BLE specification
  • Rich set of peripherals: RTC, UART, I2C, SPI, SD card interface
  • Low-power deep-sleep mode
  • Chipset: Espressif ESP32-WROVER

Prerequisites

To use a RAK11200, you need at least a WisBlock Base to plug the module in. WisBlock Base is the power supply for the RAK11200 module and has the programming/debug interface.

warning
  • BOOT0 pin of ESP32 in RAK11200 must be manually connected to GND to enable Download Mode or firmware uploading procedure.
  • Make sure to secure the module with the provided screws to ensure proper function.