Unified operative system for the WisGate Edge line that provides a feature-rich environment to access and configure the LoRaWAN gateway. The latest version of WisGateOS 2 is based on the latest version of the OpenWRT kernel for better security. WisGateOS 2 uses a simplified user interface that makes it easier to use and program. Integrated with WisDM, which allows the remote management of gateways and firmware. With extension functionality, the user can add extra features and functions to their gateways.
WisGateOS 2 v2.2.13: Cellular, Storage, Network, & UI Fixes
NOTE
WisGateOS 2 is available only for version 2 WisGate Edge gateways, Soho gateways, and Edge Ultra gateways.
The supported models are as follows:
- WisGate Edge Pro version 2: RAK7289V2, RAK7289CV2, RAK7289V2H, RAK7289CV2H
- WisGate Edge Lite 2 version 2: RAK7268V2, RAK7268CV2, RAK7268V2H, RAK7268CV2H
- WisGate Edge Prime version 2: RAK7240V2, RAK7240CV2, RAK7240V2H, RAK7240CV2H
- WisGate Edge Ultra Full-Duplex: RAK7285, RAK7285C
- WisGate Soho/Soho Pro: RAK7267
IMPORTANT
- The WisGateOS 2 firmware has been updated significantly. After this update, it is no longer possible to revert to previous versions of WisDM or the local WebUI. All WisGateOS 2 2.2.x extensions are digitally signed. During this process, extensions will automatically update. Contact RAK support before updating the WireGuard Extension.
- An internet connection is mandatory for the update process. This is because the new firmware signature needs to be confirmed, and the Extension Gallery should be accessible to update the already installed extensions.
Fixed Bugs
WisGateOS 2-related fixes:
| No. | Issue | Description |
|---|---|---|
| 1 | LNS Token Retention | Fixed an issue where the gateway retained the LNS token after switching to a different LNS with a different authentication method. |
| 2 | Cellular IP Visibility Bug | Fixed behavior where the 4G IP address remained visible in the backend after disabling Cellular via the local UI. |
| 3 | Ethernet DNS Fallback | Fixed an Ethernet DNS exception that prevented WisGateOS 2 gateways from falling back to LTE. |
| 4 | Cellular IP Parsing Issue | Addressed an issue where cellular IP could not be parsed by the OS despite the 4G module having one. |
| 5 | SD Card Mount Handling | SD card mount issue resolved; improperly seated/missing SD cards will no longer trigger mount to /overlay/upper. |
| 6 | Extension Install on SD Fault | Fixed the Extension installation proceeding despite the SD card fault, causing incorrect mount behavior. |
| 7 | Dashboard Memory Display | Corrected inaccurate memory performance display on the UI dashboard overview page. |
| 8 | APN Auth UI Bug | Resolved LTE APN authentication(user/pass) misconfigurations in the local UI. |
| 9 | Memory Leak in v2.2.11 | Fixed a memory leak in WisGateOS 2 v2.2.11 affecting certain gateways. |
| 10 | Cellular Info Lost After Reboot | Fixed an error retrieving cellular information after a power cycle when the SIM card was installed and cellular was previously disabled. |
| 11 | br-lan IP Loss on WAN Wi-Fi Enable | Fixed a problem where enabling WAN Wi-Fi via the WisDM UI caused the gateway's br-lan IP (192.168.230.1) to be lost. |
WisDM-related fixes:
| No. | Issue | Description |
|---|---|---|
| 1 | Server Error on Cellular Enable | Fixed a 500 Internal Server Error when enabling Cellular via WisDM after being disabled locally on the gateway UI. |
| 2 | ABP Switch on Device Rename | Resolved an issue where renaming an end device via WisDM resulted in an unexpected switch to ABP activation in the local application view. |
