RAK7394 Gateway Configuration

This guide explains additional configuration options for the RAK7394 WisGate Developer CM4 Gateway after completing the Quick Start Guide.

Optional Configuration

The configurations in this section are only optional and situational.

Reflashing Procedure

To reflash the RAK7394, you need to disassemble the enclosure to access the RAK314 inside.

When you have access to the RAK314, you need to follow this guide.

Change the Password

1. To change the password, use the following command to open the configuration tool:

   sudo raspi-config

Figure 1: Open the configuration tool

2. From the menu, select System Options.

Figure 1: Configuration tool

3. Select Password.

Figure 1: System options

4. A message will appear informing you that you need to enter a new password.

Figure 1: Password

5. After clicking OK, you will be prompted to enter a new password and then confirm it by entering it again.

Figure 1: Enter and confirm the new password

6. After confirming the password, the configuration tool will display a message indicating that the password has been changed successfully.

Figure 1: Password changed

Switch Network Interfaces

1. To manage your network interfaces, execute the following command:

rakpios-cli

Figure 1: Execute the command

2. You will see a menu with the available configuration options, select Manage networks.

Figure 1: Configuration options

3. This will display a list of available interfaces. Select the desired interface and configure it as preferred by making the necessary changes.

Figure 1: Available network interfaces