Skip to main content

RAK1910 WisBlock GNSS Location Module

Thank you for choosing RAK1910 WisBlock GNSS Location Module in your awesome IoT Project! 🎉 To help you get started, we have provided you all the necessary documentation for your product.

Examples

Product Description

The RAK1910 WisBlock GNSS Location Module module, part of the RAK Wireless Wisblock series, is a u-blox MAX-7Q GNSS (GPS, GLONASS, QZSS, and SBAS) module. This module features exceptional performance, high sensitivity, and minimal acquisition time, which makes it suitable for low-power IoT solutions. The RAK1910 positioning module is a GNSS receiver. It receives and tracks the GPS (including SBAS and QZSS) and the GLONASS signals. QZSS and SBAS signals (by default) can be received concurrently with GPS signals.

Product Features

  • Sensor specifications

    • Voltage Supply: 3.3 V
    • Current Consumption: 15 uA to 22 mA
    • Chipset: u-Blox MAX-7Q
    • High accuracy of 2.5 m
    • 10 Hz update rate
    • 0.1 m/s velocity accuracy
    • 0.5 degrees heading accuracy
    • Fast location fix. 29 sec from cold start to first fix. 1 sec from hot start
    • GPS and GLONASS satellite support
  • Size

    • 10 x 23 mm

Prerequisites

To use a RAK1910, you need at least a WisBlock Base and a GPS Antenna to plug the module in. WisBlock Base provides power supply to the RAK1910 module. Furthermore, you need a WisBlock Core module to use the sensor.

warning
  • The included active GPS antenna must be connected to the iPEX antenna connector on the board. Otherwise, the module will not work.
  • Make sure to fix the module with the screws to ensure a proper function.